SECTION V - SERVICING & REPLACEMENT OF PARTS
WARNING / CAUTION
Before servicing or replacing any part make sure to turn the power supply switch to the OFF position.
RELIEF VALVE
1.Disconnect power from unit.
2.Shut off incoming cold and solar water supply.
3.Lift test lever on relief valve to relieve pressure in tank.
4.Disconnect overflow piping.
5.Unscrew relief valve, remove assembly and replace with new one.
6.Connect overflow piping.
7.Turn on incoming water supply and check for leaks.
8.Turn safety switch to ON position.
Test Lever
Overflow Piping Outlet
Tank Connection
Temperature Probe
15
