IMPORTANT! WRITE DOWN MODEL NUMBER FROM BOX ON PAGE 1 OF THIS OWNERS MANUAL
1. Remove end cap at end of tank (1) to remove contents.
2
3
1
2. Turn tank bottom side up. Insert axle rod (2) through wheel (3), as shown. Secure wheel assembly to tank by tapping wheel assembly downward with hammer. It will snap into position. Repeat for opposite side, then carefully, turn tank (1) over.
1 
5
4
6
|
| TOP | |
3. Correctly identify poles sections and | MIDDLE |
| |
mark with tape as shown. | BOTTOM | ||
| |||
5” |
| 5” | |
(13 cm) |
| (13 cm) |
4. IMPORTANT! Bounce pole top (4) and middle section (5) together as shown until they no longer move toward taped reference mark. Upright assembly.
NOTE: Pole sections should have a
(9 cm) minimum overlap.
55. IMPORTANT! Add
bottom pole section (6) to assembly as shown and bounce until completely tight.
NOTE: Pole sections should have a
(9 cm) minimum overlap.
4
WOOD SCRAP
•Chute de Planche •Madera Sobrante •Holzbrett (Abfallstück)
• Tavolozza di legno
• Stukje hout
4
5
6
P/N 214326 | 8/98 | 12 |
