2.IMPORTANT! Center the alignment slot of middle pole section
(5) in the lower hole of top pole section (4) as shown. While maintaining alignment, bounce middle section of pole (5) into top section of pole (4) using wood scrap as shown until they no longer move toward taped reference mark.
5
NOTE: |
POLE SECTIONS |
SHOULD HAVE A |
MINIMUM |
OVERLAP. |
5
6
WOOD SCRAP 
(NOT SUPPLIED)
4
3.IMPORTANT! Center the alignment slot of lower
pole section (6) in the lower hole of middle pole section (4) as shown. While maintaining alignment, bounce top and middle pole assembly (4 & 5) onto bottom section of pole (6) using wood scrap as shown until they no longer move toward taped reference mark.
5
5
6
|
|
|
6 |
| WOOD SCRAP |
|
|
|
4
ID# M621404 10/05 | 8 |
