Settings & Functions
Service Searching
Easy Search
Custom Search
Automatic Search
Default Search
Custom Search
| Frequency | 818.0 |
|
| Mode | 8K FFT | |
| Guard Interval | AUTO | |
| Hierarchy | NONE | |
| Constellation | ||
| Stream | HP | |
| Code Rate | 3/4 |
|
| Frequency Offset | No Offset | |
| Network Search | No | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
?
0..9
?
Custom Search
The menu, “Custom Search” operates similar as the menu “Easy Search”, however more parameters are required to search the ser- vices. Select proper items as follows. To get proper information, please contact your installer or the network operator.
Frequency
Select the proper item within “2K FFT”, “8K FFT” and “Auto” by using
the 
buttons. If the information is not known, then “Auto” can be selected. But this takes slightly longer time if “Auto” is selected
Mode
Select the proper item within “1/4”, “1/8”, “1/16”, “1/32” and “Auto” by
using the 
buttons. If the information is not known, then “Auto” can be selected. But this takes slightly longer time.
Guard Interval
Select the proper item within “1/4”, “1/8”, “1/16”, “1/32” and “Auto” by
using the 
buttons. If the information is not known, then “Auto” can be selected. But this takes slightly longer time.
Hierarchy
Select the proper item within “None”, “alpha=1”, “alpha=2”, “alpha=4”
and “auto” by using the 
buttons. If the information is not know, then “Auto” can be selected. But this takes longer time.
Constellation
Select the proper item within “QPSK”,
“Auto” by using the 
buttons.
Stream
Select the proper item within “HP”, “LP” and “Auto”. This item is deactivated when Hierarchy is “Auto” or “None”.
Code Rate
Select the proper item within “1/2”, “2/3”, “3/4”, “5/6”, “7/8” and “Auto”
by using the 
buttons. “Auto” is recommended, if Hierarchy is set as “Auto”.
Frequency Offset
Select the proper item within “No offset”, “+1/6 MHz”,
“Auto” by using the 
buttons. “Auto” is recommended.
Network Search
Select the option “YES” to search all services in the network. Then, after STB succeeds to lock to the signal, STB will get proper information on the services in the other UHF channels and stores the information automatically. If the network operator does not transmit proper information in the default channel, STB can not search all services. It is required to search for all UHF channels manually.
