3. Installation Wizard

3.3 Channel Search

You can search channels automatically or manually. If you select manual search, you have to set parameters for search.

Search Type: Select Auto or Manual. If Manual is selected, the following options will be activated.

Frequency: Select frequency value using the /button and press the OK button. If you wish to set the frequency value, select User De￿ne, and enter the value using the NUMERIC(0-9)buttons.

Symbol Rate: Select the symbol rate using the /button and press the OK or button. If the required value is not listed, then select User De￿ne and enter the value using the NUMERIC(0-9)buttons.

Network Search: When using the network search, select Enable. When entering the Network ID, select User De￿ne. You can also disable the network search by selecting Disable.

Select Next and press the OK button to start channel search. Please wait for ￿nishing the channel search. If you want to stop the operation during search, press the OK button.

If the channel search is stopped or ￿nished, you can edit the found channels.

Select All: Select all the found channels.

Unselect All: Unselect all the found channels.

Delete: Delete the selected channels.

Select Save and press the OK button to save the result and go to the next step.

GB18

User’s Manual

Page 19
Image 19
Humax CX-FOX C II manual Channel Search