Humax CX-FOX C II manual Linear Search, Start/End Frequency, Step, Network Search

8. Installation

8.2 Linear Search

You can search channels by setting the range of frequencies and other parameters.

1.Start/End Frequency

1.Select Start/End Frequency using the / button and press the OK or  button.

2.Enter the frequency using the NUMERIC(0-9)buttons.

2.Step

1.Select Step using the / button and press the OK or  button.

2.Select an option among Auto, 250, 1000, 7000 and 8000 using the / button and press the OK button. If you do not know the value, please select Auto. If the required value does not exist, select User De￿ne and enter the value directly.

3.Network Search

1.Select Network Search using the / button and press the OK or  button.

2.Select an option among Disable, Enable and User De￿ne using the / button and press the OK button.

3.When you select User De￿ne to set the network manually, enter network value using the NUMERIC(0-9)buttons.

GB46

User’s Manual