Guide of Main Menu
4-3. Service Searching
A service is transmitted in a transport stream. To watch the service, all services in the transport stream should be searched and stored in this menu. The proper information to search the stream is provided by the network operator. Please contact your installer
or the network operator.
** The default PIN code is 0 0 0 0 .
Easy Search
The services can be searched with minimal information in this menu, “Easy Search”. But it takes more time, if the parameters are set as “Auto”. To search the services quickly, please give proper information for each items.
Channel
Select the number of VHF/UHF channel, in which the transport
stream is transmitted by using the buttons or the NUMERIC buttons(0~9). If the number is not correct, STB will fail to search any service.
Mode
Select the proper item within “2K FFT”, “8K FFT” and “Auto” by using
the buttons. If the information is not known, then “Auto” can be selected. But this takes slightly longer time if “Auto” is selected.
Guard Interval
Select the proper item within “1/4”, “1/8”, “1/16”, “1/32” and “Auto”
by using the buttons. If the information is not known, then “Auto” can be selected. But this takes slightly longer time.
Hierarchy
Select the proper item within “None”, “alpha=1”, “alpha=2”, “alpha=4”
and “Auto” by using the buttons. If the information is not know, then “Auto” can be selected. But this takes longer time.
Network Search
Select the option “YES” to search all services in the network. Then, after STB succeeds to lock to the signal, STB will get proper information on the services in the other channels and stores the information automatically. If the network operator does not transmit proper information in the default channel, STB can not search all services. It is required to search for all channels manually.