Custom Search
The menu, “Custom Search” operates similar as the menu
“Easy Search”, however more parameters are required to search the services. Select proper items as follows. To get proper information, please contact your installer or the network operator.
Frequency
Enter the exact frequency (kHz) of the channel, in which a transport stream is transmitted.
Mode
Select the proper item within “2K FFT”, “8K FFT” and “Auto” by using
the buttons. If the information is not known, then “Auto” can be selected. But this takes slightly longer time if “Auto” is selected.
Guard Interval
Select the proper item within “1/4”, “1/8”, “1/16”, “1/32” and “Auto”
by using the buttons. If the information is not known, then “Auto” can be selected. But this takes slightly longer time.
Hierarchy
Select the proper item within “None”, “alpha=1”, “alpha=2”, “alpha=4”
and “auto” by using the buttons. If the information is not know, then “Auto” can be selected. But this takes longer time.
Constellation
Select the proper item within “QPSK”,
“Auto” by using the | buttons. |
Stream
Select the proper item within “HP”, “LP” and “Auto”. This item is deactivated when Hierarchy is “Auto” or “None”.
Code Rate
Select the proper item within “1/2”, “2/3”, “3/4”, “5/6”, “7/8” and “Aut
by using the buttons. “Auto” is recommended, if Hierarchy is set as “Auto”.
Frequency Offset
Select the proper item within “No Offset”, “+1/6 MHz”,
“Auto” by using the | buttons. “Auto” is recommended. |