Guide of Main Menu
Network Search
Select the option “YES” to search all services in the network. Then, after STB succeeds to lock to the signal, STB will get proper information on the services in the other channels and stores
the information automatically. If the network operator does not transmit proper information in the default channel, STB can not search all services. It is required to search for all channels manually.
Automatic Search
The menu "Automatic Search" is the easiest method to store new stations. Proceed as follows in order to start the Automatic Search:
Start Channel
Set the lowest channel in your area by using the 
buttons.
Press the 
button to start the search.
End Channel
Enter the highest channel by using the 
buttons.
Press the 
button to start the search.
Default Search
The Default Search searches the services refering to the predefined channel list. The channel list can be chosen according to the region where the search is performed.
If the region is chosen in the menu, the channels are automatically scanned to search services.
Note : The Default Search deletes all stored services.
