Humax VA-3210 manual Output Setting, VHF Tuning, Other Setting

A/V Output Setting

Audio Output

Set the Audio mode which is output from RCA/Cinch Jack. (Stereo/Mono)

Screen Mode

Select the aspect ratio of TV which is connected to STB (4:3 or 16:9).

Display Format

Select the format which the video is to be displayed on screen.

When your TV set is 4:3 and video source is 16:9,

STB will display in Letter-box or Center mode as selected.

When your TV set is 16:9 and video source is 4:3,

STB will display in the Pillar-box or Full mode as selected.

NTSC Mode

Adjust this value between 3.58 and 4.43 if your TV displays the video only in black and white color. Normally NTSC 3.58 mode is used worldwide, but some TV sets can support only NTSC 4.43 mode.

VHF Tuning

When you watch TV after connecting a cable between

the RF OUT jack on STB and the Input jack (RF Input) on TV.

If you select Channel 3 or Channel 4 and then set VHF Tuning to Channel 3 or Channel 4, all services from STB will be viewed through TV Channel 3 or Channel 4.

Other Setting

Select the OSD transparency and Information Box Display Time.

OSD Transparency
Select the OSD transparent type. It affects Information Box,
Soundtrack, Subtitle, Service List, Time and Quick mode of
TV Guide. Use the	buttons to toggle transparent and opaque.
Info. Box Display Time
Set the display duration of Information Box displayed on the screen
after changing services. The time ranges from 0 to 20 seconds.		22