531617-1_A - 1197c_ManE.qxp 11/6/2007 4:36 AM Page 12
10.Insert cable connectors into the proper recesses on the cable collector insert. The cable connectors are keyed to prevent reverse installation, so be careful not to force the connectors into the wrong slots. If you don’t have a cable for every hole in the insert, install the blank plugs to protect the control head from the weather.
Inserting the Cables into the Cable Connector Insert
5
1
2
6
3
4 | 1 | Power | Transducer | 4 |
| 2 | Communications | Cable Collector Cover | 5 |
| 3 | Temp/Speed | Cable Collector Insert | 6 |
11.Line up the cable collector insert and cover, with the keying feature, then slide the cover into place on the insert.
Assembling the Cable Collector
1Cable Collector Insert
2 Screws
3Cable Collector Cover
1
2
3
12.Attach the cable collector insert to the cable collector cover using the (2) #6 Phillips screws provided.
13.Place the control head back onto the mounting bracket. Plug the assembled cable collector into the back of the control head, pushing gently but steadily until you feel the collector snap into place. Cable connectors and cable sockets are keyed to prevent reverse installation, so be careful not to force the connectors into the wrong sockets. Adjust the control head to the desired viewing angle and secure by tightening the gimbal knobs.
12
