6-Beam Sensitivity
(6-Beam Sonar View Only)
6-Beam Sensitivity controls how much detail is shown on the display, and is only available on the X-Press™ Menu when you are in the 6-Beam Sonar View only. Increasing the sensitivity shows more sonar returns from small baitfish and suspended debris in the water; however, the display may become too cluttered. When operating in very clear water or greater depths, increased sensitivity shows weaker returns that may be of interest. Decreasing the sensitivity eliminates the clutter from the display that is sometimes present in murky or muddy water. If Sensitivity is adjusted too low, the display may not show many sonar returns that could be fish.
To adjust the 6-Beam Sensitivity:
1.Highlight 6-Beam Sensitivity on the Sonar X-Press ™ Menu.
2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the 6- Beam Sensitivity setting. (Low = 1, High = 20, Default = 10)
Sensitivity
(2D Sonar, 2D Zoom, 2D Big Digits Views Only)
Sensitivity controls how much detail is shown on the display, and is only available on the X-Press™ Menu when you are in the 2D Sonar, 2D Zoom, 2D Big Digits Views only. Increasing the sensitivity shows more sonar returns from small baitfish and suspended debris in the water; however, the display may become too cluttered. When operating in very clear water or greater depths, increased sensitivity shows weaker returns that may be of interest. Decreasing the sensitivity eliminates the clutter from the display that is sometimes present in murky or muddy water. If Sensitivity is adjusted too low, the display may not show many sonar returns that could be fish.
| | | | |
| | | | |
Sensitivity at Low | Sensitivity at Medium | | Sensitivity at High |
| | | | |
To adjust the Sensitivity:
1.Highlight Sensitivity on the Sonar X-Press™ Menu.
2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Sensitivity setting. (Low = 1, High = 20, Default = 10)