Cursor to Waypoint

(Chart or Combo view only)

Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint, so that you can locate it or edit it.

NOTE: This X-PressTMmenu item appears only if you have saved waypoints.

To move cursor to a saved waypoint:

1.Highlight Cursor to Waypoint on the Navigation X-Press™ menu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate Cursor to Waypoint.

3.Use the UP or DOWN 4-WAY Cursor Control key to highlight the waypoint you wish to move the cursor to, then use the RIGHT 4-WAY Cusor Control key to select the destination waypoint.

Save Current Track

Save Current Track allows you to save the current track being displayed. After the current track is saved, a new current track is started.

To Save Current Track:

1.Highlight Save Current Track on the Navigation X-Press™ menu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track.

3.The Confirm dialog box will appear. To save the current track, press the RIGHT Cursor key once more. To cancel saving the current track, press the LEFT Cursor key.

50

Page 57
Image 57
Humminbird 580 manual Cursor to Waypoint, Save Current Track