Depth Alarm, Fish ID Alarm | Humminbird 580 guide

Depth Alarm

Depth Alarm sounds when the depth becomes equal to or less than the menu setting.

To change the Depth Alarm setting:

1.Highlight Depth Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models only], Default = OFF)

Fish ID Alarm

Fish ID Alarm sounds when the Fishfinder detects fish that correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+TM is on.

For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish ID alarm will sound when a large-sized fish is detected.

To change the Fish ID Alarm setting:

1.Highlight Fish ID Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm setting. (Off, All, Large/Medium, Large, Default = Off)

Off

Large

Large/Medium

All

77

Image 84

Humminbird 580 manual Depth Alarm, Fish ID Alarm

Contents

Operations Manual Thank You Table of Contents Powering Up the Unit Menu System Start-Up Options Menu Sonar X-Press Menu Sonar views onlyNavigation X-Press Menu Navigation views only Sonar Menu Tab Navigation Menu Tab Alarms Menu Tab Setup Menu TabViews Menu Tab Troubleshooting Series Fishfinder Accessories Specifications GlossaryContact Humminbird How Sonar Works Page DualBeam Plus Sonar How GPS and Cartography Work Page Multi-Media Card MMC/SD Slot What’s On the Display Bait Ball Hard Bottom Rocky Bottom Structure where fish may be hiding Adjacent to your boat, including the following items Views Views available on your Fishfinder areSonar View Sonar View Sonar View Understanding Sonar History Real Time Sonar RTS Window Freeze Frame Bottom PresentationPage Page Sonar Zoom View Sonar Zoom View 200/83 kHz Split Sonar View Big Digits View Bird’s Eye View Bird’s Eye View Chart View Combo View Chart Orientation Viewing CartographyPage Introduction to Navigation Waypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Save, Edit or Delete a Route Save or Clear a Current Track POWER/LIGHT Key Edit, Delete or Hide Saved TracksKey Functions View Key Info Key Menu Key WAY Cursor Control Key Mark Key Goto KeyZoom +/- Key Exit Key Powering Up the Unit 580 Menu System Sonar Tab Normal Mode Advanced Mode Exit Normal operation by powering your Fishfinder off Start-Up Options MenuNormal Operation Normal Simulator System Status Simulator System Status Self Test Accessory Test Accessory Test lists the accessories connected to the system GPS Diagnostic View Sonar X-Press Menu Sonar views only Sensitivity Upper Range Advanced Sonar, Split Sonar, Big Digits views only Lower Range Chart Speed Bottom View Cancel Navigation Only when Navigating Navigation X-Press Menu Navigation views only Waypoint Name Cursor to Waypoint Save Current Track Clear Current Track Save Current RouteClear Current Track allows you to clear Only when Navigating Skip Next Waypoint Remove Target Remove GridSonar Window Most recently-created waypoint Sonar Menu Tab Beam Select Fish ID+ Fish ID Sensitivity Zoom Width KHz Sensitivity Depth Lines Surface Clutter Noise Filter Max Depth Water Type Navigation Menu Tab Current Track Saved Tracks Waypoints Waypoints Submenu contains the following menu choices Routes Chart Detail Level Map Borders Lat/Lon GridMap Borders allows you to display or hide map Spot Soundings North ReferenceGrid Rotation Trackpoint Interval Track Min Distance Map Datum Set Simulation Position Set Map Offset Clear Map Offset Course Projection Line Export All Nav DataTo Export All Navigation Data Delete All Nav Data Alarms Menu Tab Depth Alarm Fish ID Alarm Low Battery Alarm Temp Alarm Off Course Alarm Arrival Alarm Drift Alarm Alarm Tone Setup Menu Tab Units Depth Units TempUnits Distance User Mode Units SpeedLanguage Triplog Reset Restore DefaultsTo Reset Triplog Highlight Reset Triplog on the Setup menu Select Readouts Advanced, Sonar view only Depth Offset Temp Offset Speed Calibration Local Time Zone Daylight Saving Time Position Format Time Format Date Format Nmea Output Sonar Views Menu Tab Troubleshooting Fishfinder Doesn’t Power Up Display Problems Does not exceed 20 Volts Finding the Cause of Noise Isolation Series Fishfinder Accessories Specifications Policy on Environmental Compliance Glossary Sonar TermsPage Page 103 Clear the screen of noise that is difficult to eliminate Receiver See Transmitter Page 107 Page 109 GPS & Navigation Terms Page Page 113 Page Page 116 117 118 119 120 121 122 123 124 125 126 Contact Humminbird Monday Friday 800 a.m. to 430 p.m. Central Standard Time