531427-1_C - 767_Man_Eng.qxd 10/25/2005 10:30 AM Page 98

Views Menu Tab

From any view, press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT 4-WAY Cursor Control key until the Views tab is selected. This menu tab allows you to set the available views to either hidden or visible in the view rotation. The view will be removed from the view rotation if it is set to Hidden and will be displayed in the view rotation if it is set to Visible. The following views are available:

• Bird’s Eye View

• Chart View

• Combo View

 

• WideSide® View (with optional-purchase WideSide® transducer)

 

• Side Beam View (with optional-purchase QuadraBeam™ transducer)

 

• Sonar View

 

• Sonar Zoom View

 

• 200/83 kHz Split Sonar View

 

• Big Digits View

 

• Circular Flasher View

 

• Screen Snapshot View

 

• Self Test

Views Menu

• Accessory Test

 

• GPS Diagnostic View.

To Change the View Status of Any View:

1.Highlight the View main menu tab.

2.Use the UP or DOWN 4-WAY Cursor Control keys to select a View.

3.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the status of the view from Hidden to Visible.

Accessories Menu Tab

From any view, press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor key until the Accessories tab is selected.

If no accessories are attached to the Accessory Bus, no accessory menu choices will appear under the Accessories tab, only the Screen Snapshot menu choice. If an accessory is attached, however, additional menu choices that support the accessory will be added automatically. See the Operations Manual that comes with your accessory for detailed information.

Accessories Menu Tab

(no accessories attached)

Accessories Menu Tab

(with accessories attached)

NOTE: Accessories to enable WeatherSense® and the SmartCast® Wireless Sonar Link require separate purchases. You can visit our website at www.humminbird.com or contact our Customer Resource Center at 1-800-633-1468 for additional details.

Using Screen Snapshot

Screen Snapshot activates the screen snapshot function. When Screen Snapshot is enabled, pressing the MARK key creates a saved screen capture on the optional-purchase MMC/SD card installed in your unit’s card slot. All menus, dialog boxes, warnings and messages are captured and saved automatically. You can view these captures on the Screen Snapshot View, which shows thumbnails of the screen captures, three at a time.

NOTE: You must have an optional-purchase MMC/SD card installed for the screen snapshot feature to work.

To turn Screen Snapshot on or off:

1.Highlight Screen Snapshot on the Accessories main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Screen Snapshot On or Off (Off, On, Default = Off).

89

90

Page 50
Image 50
Humminbird 767 manual Views Menu Tab, Accessories Menu Tab, Using Screen Snapshot, To Change the View Status of Any View