Humminbird 900 Series, 997c Combo manual Waypoints, Routes and Tracks

Waypoints, Routes and Tracks

Waypoints are stored positions that allow you to mark areas of interest or navigation points. Your 900 Series™ can store up to 3000 waypoints.

	Waypoints, Routes and Tracks
1
2	8
11	9
3
4	10
5
6
7

Routes link two or more waypoints together to create a path for navigation, and are used in trip planning. You can link individual waypoints together by using the GOTO key. A route represents your intended navigation and shows the shortest path from each waypoint to the next. As you travel a route, staying on the route line is the most efficient way to get to your destination, although you should always look out for obstacles not shown on the chart. Your 900 Series™ can store up to 50 routes that can each contain up to 50 waypoints.

Tracks consist of detailed position history, and are displayed as a breadcrumb trail of trackpoints. The Current Track shows the position history since the unit was powered up (maximum of 20,000 trackpoints displayed). You can clear the Current Track or save it at any time. Your 900 Series™ can store up to 50 saved tracks, each containing 20,000 trackpoints. The current track represents your actual path so far.

1Depth

2Course: Direction that boat is traveling

relative to North Reference

3Bearing: Direction to Destination Waypoint

Relative to North Reference

4XTE: Cross Track Error. Distance of Boat from Route

5DTG: Distance to Go to Waypoint

TTG: Estimate of Trip Time to Destination Waypoint	6
Speed Over Ground: Speed of Boat	7
Waypoint	8
Route	9
Off-Course Alarm Limits	10
Map Scale	11

58