USING THE LCR400ID
USING THE BUILT-IN SIMULATOR
USING THE LCR400ID
This section provides complete
information on operating the LCR 400ID
through its front panel controls. You are
encouraged to read this information
completely as you first learn to use the
LCR 400ID. Doing so will ensure you
make the most of its many features and
functions.
The first part of this section explains the
use of the built-in practice simulator,
which you can use to practice selecting
functions through the front panel. The
remaining instructions, which can be
followed while using the simulator or in actual operation, explain each function and are
organized according to the front panel layout.
USING THE BUILT-IN SIMULATOR
The LCR 400ID includes a built-in simulator that helps you learn to use your new
equipment. The simulator displays a typical underwater scene, and lets you practice
with the controls.
The unit must be turned off before you start the simulator. To activate it, press down
and hold the POWER button until a chirping sound begins. Release the button, and the
built-in simulator begins displaying a typical LCR 400ID reading.
You can use the simulator to learn the functions explained in the following pages, just
as if you were getting actual on-the-water readings (but note that “Sensitivity” is
disabled). To turn off the simulator, turn off the unit by pressing the POWER button
again.
Of course, the best way to learn the LCR 400ID is with actual use, especially in familiar
waters. If you know what’s below and see it on-screen, you’ll quickly become an LCR
400ID expert.