®
4.Connect the wires as shown in Figure 5c. To connect the wires, twist the bare metal leads to- gether. Place a wire nut over the intertwined length of wire and twist clockwise until tight as shown.
CAUTION
Be sure no bare wire or wire strands are visible after mak- ing connections.
5. Separate the connected wires by |
placing the green and white wires |
on one side of the outlet box and |
Wall Switch Wire For
Separate Control of Light Fixture
Power Black
Wires
In White
Ceiling
Bare or Green
2 x 4 Brace
Green
Approved 
Connectors
(Note: Wall switch must be acceptable as a
Outlet Box
Ceiling
1 Plate
the black and the black/white |
wires on the other side of the |
outlet box. |
6. Turn the connectors upward. Push |
the wires gently into the outlet |
box. |
Green Ground Wire from Hanger Pipe (not present with flush mounting option)
White | Black |
2 
Black/White
3Wires From Fan
Connections:
1Connect Blk/Wht Wire from fan to Wall Switch Wire for separate control of light fixture, or
2Connect Blk/Wht Wire from fan to Ceiling Black Wire if there is no separate Wall Switch Wire for the light fixture.
Figure 5c - Wiring Diagram
14
