Hunter Fan 41545 operation manual Troubleshooting, Problem, Probable Cause, Solution

®

TROUBLESHOOTING

PROBLEM

Nothing happens; fan does not move.

PROBABLE CAUSE

1.Power turned off, fuse blown, or circuit breaker tripped.

2.Loose wire connections or wrong connections.

3.Motor reversing switch not en- gaged.

4.Pull chain switch not “on.”

5.Shipping bumpers still in place.

SOLUTION

1.Turn power on, replace fuse, or re- set breaker.

2a. Loosen canopy, check all connections according to STEP 5 - WIRING THE FAN (turn power off before checking).

2b.Check the plug connection in the switch housing according to STEP 8-ATTACHING THE SWITCH HOUS- ING.

3.Push switch firmly up or down.

4.Pull switch chain.

5.Remove shipping bumpers.

Noisy operation.	1.	Blade brackets screwed loosely to	1.	Tighten screws until snug.
		motor.
	2.	Blade screwed loosely to blade iron.	2.	Tighten screws until snug.
	3.	Blade cracked.	3.	Replace all blades.

41545-01 6/10/2002

24