9-1. Remove the flathead thumbscrew preassembled in the top edge of the glass bowl. Set it aside for reuse in step 9-5.
9-2. Install three candelabra light bulbs (40 Watt maximum each).
9-3. To install the glass bowl, loosen the four thumbscrews on the edge of the glass bowl. Raise the glass, inserting the thumbscrews through the keyhole slots in the edge of the light fixture.
9-4. Rotate the glass bowl until the thumbscrews are firmly situated in the light fixture. Tighten all four thumbscrews.
9-5. Insert the flathead thumbscrew (from Step 9-1) into the round hole on the top of the light fixture. Tighten it to secure the glass bowl.
9-6. Restore power to the fan.
Keyhole Slot
Flathead
umbscrew
