10-1. e remote has individual buttons for setting fan speed and light intensity. Refer to the figure on the right.
Note: For best operation, start the fan by pressing high, then select your desired speed.
10-2. e light button turns the light on to full brightness. To dim the light, hold the light button until you reach your desired brightness. Push the light button again to turn off the light.
10-3. When necessary, replace the battery with a 9-volt alkaline battery.
10-4. You can mount the remote holder to any toggle switch plate with the screws already in the switch plate. Or, you can simply mount the remote holder on the wall.