PROGRAMMING | 14 |
Setting Time and Day
■The LCD will show this information when batteries are first installed, or after the Reset button is pressed. The temperature will update after a few seconds.
■During time and day setting mode, the temperature and program displays will go blank.
■Example: Set the Thermostat to the current time of 2:16 pm on Saturday. Refer to the Steps below.
STEP 1: | ■ Press to enter time and day setting mode. The cur- |
| rent hour and the AM / PM indicator will be flashing. |
| ■ Press to change the Hour up or down to the |
| current hour. |
| Note the Tw [(Note the )55.5/F10 1 Tf |
STEP 12 | ■ Press tagainto change tfromhour aetting mo cminut |
| .ThPettingcur |
| ■ |