Filter Monitor | 31 |
Your thermostat also keeps a record of the number of hours your filter has been in use. To maximize your system’s performance and energy efficiency, change or clean your filter regularly.
■ When the total system run time for heat and cool reaches 400 hours, FILTER will flash on the LCD display to remind you to clean or change your system’s filter. FILTER will continue to flash until the counter is set back to zero.
filter | ■ Press to review total filter usage. The display will | |
blink FILTER ,then show the Filter Monitor counter. | ||
| ||
| After 15 seconds, the display will return to normal | |
| mode, or you can hit RETURN to exit immediately. | |
| The Filter Monitor will display up to 999 hours and | |
| 59 minutes of usage. | |
| In this example, the counter is at 410 Hours, | |
| 26 minutes. | |
| ■ To reset the Filter Monitor counter, depress FILTER | |
| for 3 seconds. The display will blink, and the counter | |
| will be reset to zero. |
W
PM
FILTER
2
COOL TEMP
Hr
FILTER
Min
NOTE: Clearing the Filter Monitor counter will also clear ALL Energy Monitor counters, as Filter usage and Total Energy usage are the same. Also, clearing the Energy Monitor counters will clear the Filter Monitor counter as well.