7 • Completing Your Installation With or Without a Bowl Light Fixture

Installing the Glass Bowl

7-1. If you want to install the light fixture, proceed with Step 7-2 now.

If you do not want to install the light fixture, you need to uninstall it now. See “Uninstalling the Light Fixture” in Step

7-7. Once you have uninstalled the light fixture, continue with step 7-2.

7-2. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)

7-3. Feed the fan and light pull chains as

shown in Step 7-3 illustration.

7-4. Install the Pin Base CFL (26 Watt

Maximum) into the socket.

7-5. Place the cover plate up against the glass bowl. Align the holes in the cover plate with the grommet hole of the metal disk.

7-6. Screw the finial onto the threaded rod end until tight.

Go to 8 • Operating and Cleaning the Fan.

Step 7-3

 

Light Bulb

 

(Pin Base CFL)

Fan

Light

Pull Chain

Pull Chain

Grommet Hole

 

(Metal Disk)

 

Fan

Light

Pull Chain

Pull Chain

Hole (Cover Plate)

 

 

Finial

Bbulb(s) & Glass

Breakaway

Connector

11

Install

45006-01 • 09/26/07 • Hunter Fan Company

Page 12
Image 12
Hunter Fan 45006-0109 warranty Installing the Glass Bowl, Screw the finial onto the threaded rod end until tight