Hunter Fan 45006-0109 warranty Assembling and Hanging the Fan Low Profile Only, Fan assembly

3 • Assembling and Hanging the Fan (Low Profile Only)

You can assemble your fan for standard or angle mounting as shown in steps 3-1 – 3-3 on the previous page. For low profile mounting (ceilings less than 8 feet high), see steps 3-6 – 3-10 on this page.

3-6.	Remove the screws from the hanger ball bracket.
3-7.	Place the low profile washer from the parts sack into the canopy.
3-8.	Place the canopy trim ring and canopy with washer on top of the
	fan assembly.
3-9.	Align the screw holes in the washer with the holes in the adapter.	Step 3-6
	Assemble securely with three #8-32 x 1/2” screws.
3-10.	Raise the fan and place the hook on the hanger bracket through
		(Not Actual Size)
	the round hole in the rim of the canopy.

WARNING: Fan may fall if not assembled as directed in these installation instructions.

Steps 3-8 – 3-9

Low Profile Washer

Step 3-7 (Detail)

Low Profile Washer

Adapter Canopy

Trim Ring

#8-32 x 1/2” Screw Step 3-10

7

Install Bracket & Wiring

45006-01 • 09/26/07 • Hunter Fan Company