Uninstalling the Light Fixture
7-7. Remove the lower switch housing screws, then remove the lower switch housing.
7-8. To uninstall the light fixture, disconnect the 9-pin plug connectors.
7-9. You must remove the wiring harness and its components from the integrated light fixture. You must then install the wiring harness into the empty switch housing included with the fan.
7-10. Locate the reversing switch and carefully remove the two screws holding the reversing switch to the lower switch housing. Then, remove the reversing switch from the housing.
7-11. Remove the patented breakaway connector from the end of the fan pull chain. Carefully loosen the bellmouth nut from the pull chain and remove the pull chain switch from the light fixture housing.
7-12. Locate and carefully remove the two capacitors.
7-13. Unplug the two-pin wire connector with one white wire and a black with white striped wire coming from the multi-wire connector.
7-14. You have now disconnected the wiring harness and its components and are ready to install them into the empty switch housing. (The light switch remains in the light assembly housing.)
7-15. Insert the pull chain and fan pull chain switch through the round opening on the side of the empty switch housing. Thread the bellmouth nut over the pull chain and hand tighten the bellmouth nut.
7-16. Reattach the breakaway connector to the pull chain.
7-17. Insert the reversing switch into the square hole on the side of the switch housing. Install and tighten the two screws you removed previously from the other switch housing.
7-18. Carefully place the capacitors in the switch housing.
7-13. Install the switch housing cap and plug button to the lower switch housing.
7-14. Re-attach the 9-pin plug and reinstall the lower switch housing screws.
