Hunter Fan 82004 manual Existing Construction, Existing Fan, Route wires through strain relief

Existing Construction

B11 EXISTING FAN

B12

E

Remove an existing fan and check to make sure the open-	Move the housing into position above the ceiling.
ing is large enough to accommodate the new motor hous-
ing (7 1/4”x 7 3/4”).

B13

Route wires through strain relief.

B14

2

1

Attach existing ducting to duct connector. Tape joints.

If ducting does not fit securely,

an adapter may need to be purchased.

B15

E

Screw pre-loaded screws into joist or framing.

8

05-HF-017-EngS_3.29.06.indd 8

41946-01 3/29/2006

3/29/06 6:54:59 PM