|
|
| 5” |
|
| 7 | |
9” | . |
| |
9 |
|
| |
|
|
|
Cut out an opening for the housing.
C12 | D |
| E |
Slide the mounting rails into brackets.
C17 | C18 |
Attach the rails onto the screws. | Tighten screws. |
C13 |
| C14 |
| 5/8 | 5/8 |
| 1/2 | |
| 1/2 | |
|
|
Position the correct depth mark at the bottom edge of the | Mark position of screws by using holes as a template. |
joist based on the thickness of your sheetrock. |
|
C19 |
Connect 4” duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may
need to be purchased.
C20 |
Pull wires through the strain relief.
C15C16
Drill a hole in the center of each outline. | Insert screws, leaving space between the screw head |
| and the joist. Screws are not provided. |
C21
Tighten the strain relief screws.
12 | 13 |