Hunter Fan 90067, 90066 Ec B, New Construction - attaching to joist, Choose Installation Option

3	4
H
	E

Remove the motor/blower from the housing. Remove packing material.

9

EC

B

Pop out the first wiring access slug. Use second if needed.	Insert the strain relief into the housing and
	secure with the washer.

5

Remove the pre-loaded screw tip covers.

6

Back out the pre-loaded screw tips until flush

with the side of the housing.

Choose Installation Option

For New Construction - attaching to joist go to step A11, page 5

For New Construction - suspended between joists go to step B11, page 8 For Existing Construction - accessible from above go to step C11, page 11

For Existing Construction - accessible only from below go to step D11, page 15

7

G

Remove the wiring cover screw.

8 F

Remove the wiring cover.

New Construction - attaching to joist

A11
	E
5/8	5/8
	1/2
1/2

Position the correct depth mark at the bottom edge of the

joist based on the thickness of your sheetrock.

A12

Screw pre-loaded screws into joist or framing.

4 41723-01 12/25/2004

41723-01 12/25/2004 5