Hunter Fan Illumi-Heat O P E R At I O N, Technical Support, Install Glass Dome, Install Finial

I N S TA L L AT I O N c o n t i n u e d

8)Position the Glass Dome under the Heater/Light Fixture as shown in Figure 11a. Then, place the Glass Dome over the Heater/Light Fixture as shown in Figure 11b.

Heater

Glass Dome

Figure 11a Install Glass Dome Figure 11b

9)Position the Finial over the Glass Dome as shown in Figure 12, and twist it clockwise until tight.

Glass

Finial

Figure 12 - Install Finial

O P E R AT I O N

1)Restore power at the breaker.

2)Install the 12V alkaline battery (included) into the Transmitter.

3)Use the Heater On/Off buttons on the Transmitter to turn the Heater on and off. Use the Light On/Off buttons to turn the light on and off. See Figure 13.

Heater Off	Heater On
HEATER
OFF	ON
LIGHT
OFF	ON
Light Off	Light On

Figure 13 - Transmitter Buttons

4)Mount the Transmitter Holder over the Illumi-Heat’s wall switch using the the existing wall plate screws. See Figure 14.

5)The Transmitter can be placed in the Transmitter Holder for convenience or safekeeping.

Figure 14 - Installing Transmitter Holder

Technical Support

If you have any additional questions or problems with your Illumi-Heat please call 1-888-830-1326 (in the United States) or 1-866-268-1936 (in Canada), or contact us over the internet at www.hunterfan.com.

43533-01 05/28/2008 10 11 43533-01 05/28/2008