Hunter Fan Illumi-Heat owner manual I N S Ta L L At I O N, I N S TA L L AT I O N c o n t i n u e d

I N S TA L L AT I O N

1)If you are replacing an existing light fixture, disconnect and remove the old fixture and hanger bracket, leaving the exposed wires coming from the electrical box.

2)Attach the Hanger Bracket assembly to the electrical box as shown in Figure 5.

Electrical Box

Hanger Bracket

Figure 5 - Attach Hanger to Electrical Box

I N S TA L L AT I O N c o n t i n u e d

3) Suspend the fixture by placing the Cable Loop over the Cable Loop Hanger. See Figure 6.

Cable Loop Hanger

Cable Loop

Figure 6 - Suspend the Fixture

4)Use UL-approved wire connectors to connect the wires, black-to-black, white-to-white. Loop the ground wires around the Ground Screw, then tighten the Ground Screw. See Figure 7.

Ground Screw

Figure 7 - Ground Screw

43533-01 05/28/2008 6 7 43533-01 05/28/2008