Husky 16628 instruction manual 10X8 FLOOR KIT INSTRUCTIONS CONTINUED, Floor Panel Attachment

10X8 FLOOR KIT INSTRUCTIONS CONTINUED

FLOOR PANEL ATTACHMENT:

C:Position a 48 x 92-5/8” Floor Panel A flush to the outside edges of sides and back of Floor Frame. Secure panel with two 2” nails at outside corners and one 2” nail at other corners.

D:Position the other 48” x 92-5/8” Floor Panel A flush against first panel and flush to edges of Floor Frame. Secure panel with one 2” nail at each of the four corners.

E:Position the 23-7/8” x 92-5/8” Floor Panel B flush against second panel and flush to edges of Floor Frame. Secure panel with two 2” nails at outside corners and one 2” nail at each of other corners.

With Floor Panels flush to outside edges of Floor Frame, nail with 2” nails every 12” through Floor Panels into all Floor Bond Boards D & E and Floor Joists C .

Note: Mark a line on the Floor Panel over the center of each Floor Joist @ 24” using a pencil and a piece of lumber from the kit (or use a chalk line) to make nailing easier.

Your Floor is now complete. Check to be sure it is properly positioned and leveled to ground before beginning assembly of your Handy Home Wooden Storage Building.

C

92-5/8"

CA

ED 120"

D

AA

ED

Nails every 12" (30 cm)

through Floor Panels into all Floor Bond Boards and Joists

E

	24"			24"
B	(61 cm)	A	A	(61 cm)

E D

6