Husky H2000 warranty Problem Or Concern, Possible Cause, Solution, Gun is not operating properly

PROBLEM OR CONCERN	POSSIBLE CAUSE	SOLUTION
Unit will not stop when trigger is	Wand is malfunctioning	Test both wands to ensure that one is not
released (contd)		malfunctioning.
	Gun is not operating properly	Remove Wand from the Gun and squeeze trigger to
		ensure that the water is coming out of the front of the
		Gun at a rate equal to the Garden Hose.
Wand - Attaching		ToattachtheWandapplysomemoderatedownward
		pressure force on the Wand (In the direction of the
		trigger) while simultaneously twisting the wand a 1/4
		of a turn counterclockwise. (It may help if you set the
		gun vertically on a flat surface with the wand pointing
		upwards). The two tabs on the end of the Wand must
		slide all the way in before the Wand will twist and
		lock. If this does not work remove the o-ring from the
		end of the wand and attach it without the o-ring. If the
		wand attaches, you will need to replace the o-ring.
		Contact us at:
		customerservice@huskypowerwasher.com
		or order a replacement directly online at:
		www.huskypowerwasher.com.
Wand - Removing		Release the back pressure in the Gun/Hose.
		Remove the Garden Hose from the unit and
		squeeze the trigger of the Gun. Apply some
		moderate downward pressure force on the
		Wand (In the direction of the trigger) while
		simultaneously twisting the wand a 1/4 of
		a turn clockwise. (It may help if you set the
		gun vertically on a flat surface with the Wand
		pointing upwards). For additional assistance
		you can email us at:
		customerservice@huskypowerwasher.com.
The green “Ready” light is not	No power	Check that the circuit is dedicated and rated
illuminated.		at 15 amps or greater.
NOTE: The green “Ready” light
should illuminate when the machine
is plugged in and the ON button is
depressed.
The yellow “Medium” light will not	The Click-N-CleanTMis not set	Make sure that the Click-N-CleanTMwand is set
illuminate.	to the proper position.	to the “Medium Fan Spray” or “Detergent Spray”
NOTE: The yellow “Medium” light		position.
will only illuminate when using the
Click-N-CleanTM wand set to the
	Use of improper extension	Use proper extension cord as recommended in
“Medium Fan Spray” or “Detergent	cord.	Owner’s Manual.
Spray” position and the gun trigger
is depressed, motor is running, and
	Clogged nozzle	Clean nozzle as instructed in Owner’s Manual
water is spraying from the nozzle.
		section 5.2.
The blue “High” light will not il-	Faucet not fully open or unit is	Ensure that the faucet is fully open.
luminate.	not receiving a full volume of	Check garden hose connection and ensure that
NOTE: The blue “High” light will	water.	the garden hose meets criteria as described in the
only illuminate when using the		Owner’s Manual.
Turbo lance, Flexi-lance, or Cli-
	Screen filter clogged.	Clean the screen filter as instructed in Owner’s
ck-N-CleanTM wand set to the		Manual section 5.4.
“High Pressure Fan Spray” posi-
tion and the gun trigger is depres-
sed, motor is running and water
is spraying from the nozzle.

26