English
1.0 MOVING AND STORAGE INSTRUCTIONS
WARNING
Mounting bracket is designed for use with HD 1500 HSDS only.
WARNING |
Fig. 1 |
A |
B |
WARNING
The mounting template is designed to ac- commodate stud layout of 16 inch (40.6
WARNING cm) on center.
Note: Stud layouts may vary.
If your wall studs are not located 16’’ apart, use a 1/2’’ (12.7 mm) thick, 8’’ (20.3 cm) wide, plywood panel long enough to attach to the studs using (4) # 12x2’’ wood screws (not provided).
The mounting brackets may then be attached to the plywood panel using the 4 screws (28) provided.
WARNING
For plywood installation, to prevent the 
unit from falling, make sure you select the WARNING proper length of fastener for the secure
mounting of plywood to the wall studs.
WARNING
It is necessary to affix the mounting plate 
directly to a framing stud or other ap- WARNING propriate surface able to support 67 lbs
(30 kg).
Fig. 2 |
WARNING
Consult local hardware professional for WARNING proper mounting fasteners.
WARNING
Failure to use proper mounting fasteners 
or follow mounting instructions may result WARNING in damage to equipment, property or
personal injury.
3
