English
PROBLEM OR CONCERN | POSSIBLE CAUSE | SOLUTION |
|
|
|
Leaking water from bottom | Manifold Assembly is leaking | Remove the front cover of the unit. If there is |
of unit | water | water leaking anywhere from the Manifold |
|
| please contact us at customerservice@hus |
|
| kypowerwasher.com or order a replace- |
|
| ment directly online at www.huskypowe- |
|
| rwasher.com. |
| Pump housing is leaking water | Email us at customerservice@huskypow |
|
| erwasher.com for assistance. |
Low pressure | Faucet not fully open or unit is | Open the faucet all the way. |
| not receiving a full volume of |
|
| water |
|
Not building maximum | Screen Filter is clogged | Clean the Screen filter as instructed in the sec- |
pressure |
| tion 6.4. |
Irregular pressure | Gun or Hose failure | Replace Gun and/or Hose. Contact us at c |
|
| ustomerservice@huskypowerwasher. |
|
| com or order online at www.huskypowe- |
|
| rwasher.com. |
| Kink in the Garden Hose or Hose | Unwrap the Garden Hose and lay it out flat to |
| is wrapped on a storage wheel | ensure that there are no kinks in the Hose. |
| Water leaking from either Hose | Stop water from leaking before using the unit |
| or Unit | or contact us if you need assistance. |
| Garden Hose length is too long | Shorten the length of the Garden Hose. We |
|
| recommend a maximum length of 25 to 50 |
|
| feet for City water supply and 30 feet for Well |
|
| water supply. |
| Clogged Nozzle | Clean the Nozzle as instructed in section 6.2. |
| Air in Pump | Let Pressure washer run with Gun trigger de- |
|
| pressed and Wand removed until a steady |
|
| stream of water is released. |
| No Wand attached to the front | Attach either the Turbo or Adjustable Wand to |
| of the Gun | the front of the Gun. (High Pressure is created |
|
| with the Wand and not the Gun). |
No water coming out of | Clogged Nozzle | Clean Nozzle as instructed in section 6.2. |
Wand |
|
|
| Quick Connect is attached in- | To Attach Quick Connect properly, keep the |
| correctly | outer collar of the Quick Connect held back |
|
| while sliding the Quick Connect all the way |
|
| forward against the Inlet Nipple and then re- |
|
| lease the collar to lock it into place. (The collar |
|
| is spring loaded so if it is released too soon it |
|
| will not lock into place). |
| Sceen Filter is clogged | Clean the Sceen filter as instructed in section 6.4. |
| Kink in the Garden Hose or | Unwrap the Garden Hose and lay it out flat to |
| Hose is wrapped on a storage | ensure that there are no kinks in the Hose. |
| wheel |
|
19
