Husqvarna 142 Identification What is WHAT?, Identification of Symbols, Chain Brake Assembly

IDENTIFICATION (WHAT IS WHAT?)

															1
				1		2		3				6
															7
									12		5
20
												4
		8
19	18		17		16		22		15		14	13				9
														11	10
									23				24	21
1.	Cylinder Cover											13.	Bar Tip Sprocket
2.	Front Handle											14.	Saw Chain
3.	Front Hand Guard											15.	Saw Bar
4.	Starter Cover											16.	Chain Catcher
5.	Chain Oil Tank											17.	Chain Brake Assembly
6.	Starter Handle											18.	Rear Hand Guard
7.	Carburetor Adjusting Screw											19.	Throttle Control/Trigger
8.	Choke Control											20.	Throttle Lock
9.	Rear Handle											21.	Bar/Chain Adjustment Tool
10.	ON/STOP Switch											22.	Chain Tensioning Screw
11.	Fuel Tank											23.	Instruction Manual
12.	Muffler											24.	Guide Bar Cover

IDENTIFICATION OF SYMBOLS

WARNING! This chain saw can be dangerous! Care- less or improper use can cause serious or even fatal injury.

Read and understand the instruction manual before using the chain saw.

Always wear appropriate ear protection, eye protection and head protection.

Always use two hands when operating the chain saw.

WARNING! Contacting the guide bar tip with any object should be avoided; tip contact may cause the guide bar to move suddenly upward and backward, which may cause se- rious injury.

XX_

Measured maximum kickback value without chain brake for the bar and chain combination on the label.

2