Husqvarna 1827EXLT warranty To Replace Belts See Fig

Models: 1827EXLT

1 28
Download 28 pages 15.89 Kb
Page 19
Image 19

SERVICE AND ADJUSTMENTS

TO REPLACE BELTS (See Fig. 26)

The auger and traction drive belts are not adjustable. If the belts are damaged or begin to slip from wear, they should be replaced. It is recommended that the belt(s) be replaced by a service center/department.

NOTE: It is recommended that both the auger and traction drive belt be replaced at the same time.

The V-belts on your snow thrower are of special construc- tion and should be replaced by original equipment manu- facturer (OEM) belts available from your nearest service center/department. Using other than OEM belts can cause personal injury or damage to the snow thrower.

WARNING: Belt replacement requires separation of the snow thrower. While separating the auger housing from the frame assembly, it is important that an assistant stand in the operating position and hold the snow thrower handles. Serious personal injury and/ or damage to the unit could occur if the snow thrower should fall during the belt changing process.

FRAME

AUGER

ASSEMBLY

HOUSING

HANDLES

1.REMOVE GASOLINE FROM FUEL TANK - Drain gasoline from fuel tank into a suitable container, out- doors, away from fire or flame. Wipe up any spilled gasoline.

2.REMOVE DISCHARGE CHUTE - Loosen locknut securing chute rotator head to mounting bracket only enough to allow chute rotator head to be raised and discharge chute to be removed from snow thrower.

3.REMOVE BELT COVER - See “TO REMOVE BELT COVER” in this section of this manual.

4.REMOVE ENGINE PULLEY - Remove bolt, flat washer securing pulley to engine crankshaft. Remove outside (auger) pulley only from crankshaft.

5.SEPARATE SNOW THROWER - With your assistant standing in the operating position holding the handles, remove the four (4) bolts holding auger housing and frame together.

WARNING: As the last bolt is removed, have your assistant carefully lower the handles down to the ground.

6. REMOVE AUGER BELT from around pulley.

7.RELIEVE TENSION ON TRACTION DRIVE BELT IDLER and remove traction drive belt from around pulleys.

HINT: Insert a 3/8" drive ratchet (in the “ON” position) into the square hole in idler arm and rotate ratchet clockwise to relieve tension.

8.With tension relieved on idler, install new traction drive belt around pulleys and inside belt keepers.

9.Place auger belt around and inside the groove of auger pulley only.

10.While your assistant slowly raises handles to rejoin the auger housing and frame assembly, pull up on the auger belt and squeeze sides together above pulley so belt is fully seated in groove of pulley.

11.Move idler arm so it does not hit impeller pulley as you bring snow thrower completely together and check carefully for proper routing of belts. If auger belt has become dislodged from the pulley (by catching the idler arm bracket while bringing snow thrower together), separate the snow thrower and repeat step 12. Belt must be fully seated in pulley groove when bringing the snow thrower together.

12.Install the two (2) hex bolts and tighten securely.

13.INSTALL ENGINE PULLEY - Place belt in pulley groove and slide pulley on crankshaft. Install flat washer, bolt and tighten securely (41-47 N-m torque). Make sure belt is inside belt keeper.

14.INSTALL BELT COVER and two (2) screws. Tighten securely.

15.INSTALL DISCHARGE CHUTE – See “INSTALL DIS- CHARGE CHUTE / CHUTE ROTATER HEAD” in the Assembly / Pre-Operation section of this manual.

 

BELT KEEPER

 

 

TRACTION DRIVE BELT

 

ENGINE

 

 

PULLEY

FLAT WASHER

 

 

BOLT

IDLER ARM

AUGER

BELT

SQUARE

 

 

HOLE

 

 

CLUTCHING

 

 

IDLER ARM

 

 

BRACKET

 

FRAME

AUGER PULLEY

 

 

BOLTS

 

BOLTS

 

AUGER

 

 

HOUSING

 

FIG. 26

19

Page 19
Image 19
Husqvarna 1827EXLT warranty To Replace Belts See Fig

1827EXLT specifications

The Husqvarna 1827EXLT is a robust snow thrower designed to tackle harsh winter conditions with ease and efficiency. With its powerful engine and advanced features, it promises performance and reliability, making it an ideal choice for homeowners who need to clear driveways, walkways, and large areas of snow.

Equipped with a 272cc Husqvarna engine, the 1827EXLT provides an impressive output, ensuring that it can handle heavy and wet snow without any issues. The engine is designed for easy starting, even in cold weather conditions, making winter maintenance a hassle-free experience.

One of the standout features of the 1827EXLT is its two-stage snow throwing mechanism. This design utilizes an auger to collect snow, which is then propelled by an impeller through the chute. The result is efficient snow removal, where the snow can be thrown up to 33 feet away. This extended throwing distance ensures that you can clear large areas without needing to move snow back into already cleared sections.

The snow thrower boasts a clearing width of 27 inches, making it capable of handling wider paths and driveways in fewer passes. The adjustable skid shoes provide customization to the height at which the machine operates, allowing you to prevent damage to surfaces while effectively clearing snow.

The 1827EXLT also features a friction disc transmission that enables smooth speed changes, ensuring a comfortable operation. With six forward and two reverse gears, users can easily navigate various terrains and adapt to changing conditions.

Furthermore, the snow thrower is designed with user comfort in mind. It features heated grips, which significantly enhance the operator's comfort during prolonged use in cold conditions. The easy-to-use control panel provides quick access to all the essential functions, including chute rotation and deflection controls, enhancing the user's experience.

Durability is another big selling point of the Husqvarna 1827EXLT. Its heavy-duty steel frame and high-strength plastic components ensure long-lasting performance and resistance against wear.

In conclusion, the Husqvarna 1827EXLT is a powerful and reliable snow thrower that combines advanced features and user-friendly technology. It is perfect for those who need a dependable machine to keep their outdoor spaces clear during winter, ensuring practicality and efficiency in snow removal tasks. Whether dealing with heavy snowfalls or light dustings, the 1827EXLT stands ready to handle the job.