Pioneer SVJ-DL01D, SVJ-DS01D manual It is effective when a song is for playing a loop

3 Playing Sound Playing a Part of a Song Repeatedly

2 While paused, click the [Loop In] button at the point where the loop is to start playing.

•The point specified in this operation is called the loop in point.

3 While paused, click the [Loop Out] button at the point to end playing the loop.

•The point specified in this step is called the loop out point.

•In a moment, the loop starts playing. (While the loop is playing, the [Loop In] [Loop Out] buttons blink on and off.)

•The Loop display on the information display comes on.

Playing an entire song as a loop (One Track Loop)

To play an entire song (track) as a loop, click the [One Track Loop] button.

It is effective when a song is for playing a loop.

When Cues are Set

The point specified to the [CUE] button becomes the loop in point.

Out Adjust Function

If you follow the procedures below, you can adjust the loop out point you specified previously.

1.While the loop is playing, click the [Loop Out] button.

2.Use [8] [9] or [Jog Dial] to find the desired loop out point. (While you are making adjustments, the [Loop Out] button blinks off and on more quickly than during playback)

3.Click the [Loop Out] button.

*It stays in the loop-out adjust status until you press the [Loop Out] button.

*The [Loop In] point cannot be adjusted.

When Auto Cue is ON

Even if an auto-cue has been set, the beginning of the track will be the loop in point.

Index Contents DJS Ver. 1.600 45