Pioneer SVJ-DL01 gauge when playback is to start for Player B, Step, Contd. on the next page

2 Mixing Songs Using the Auto Function to Mix Songs

Step	1	2	3	4	5	6	7
	8	9	10	11	12	13	14

10 Click player B’s [CUE] button and to set up the place where playback is to start.

11 Click player B’s [BPM SYNC] button and it will match the speed of player A’s song.

12 Using the [Beat Indicator] of Player A as a guide,

gauge when playback is to start for Player B.

About the Beat Indicators

The [Beat Indicator] is composed of one large, circular indicator on the left and 3 smaller circular indicators to its right. Usually, the largest waveform is shown in the large, round indicator as the beginning of the beat.

(Contd. on the next page)

Using the [CUE] button

‘Using the [CUE] button’ P.28

Recording Cues

(Track Hot Cues / List Hot Cues)

‘4-1 Setting up to 4 Points to Start Playing (Track Hot Cue)’ P.57

‘3-4 Setting up to 8 Points to Start Playing (List Hot Cue)’ P.47

[BPM SYNC] Button

This button automatically adjusts the speed of the next song to synchronize with the speed of the song being played. The speed of a song is called its BPM (Beats Per Minute). The button is called [BPM SYNC] as it automatically synchronizes the BPM of the two songs.

[Beat Indicators]

The indicators display the beats of players A & B. In order to mix the songs cleanly, it is essential to synchronize the 2 beats perfectly.

Adjusting Disparities in the Beat Displays

‘Adjusting discrepancies in the [Beat Indicator]’ P.27

24 DJS Ver. 1.600 Index Contents