Pioneer SVJ-DS01D, SVJ-DL01 manual Click the Save button, Click Save and then click the Save button

5 Creating Loops Made Easy Making a Loop

3 Click the point to set as the cue or the loop in/out point on the waveform display (entire/enlarged). (If setting up a loop, then go ahead and click the loop out point.)

Setting a Cue Setting a Loop Out

•The track hot cue tags are displayed in the waveform display and it starts to play from the point you clicked. (If a loop was set up, it plays the loop.)

•You can set up a max of 4 cues or loops.

4 Click the [Save] button.

• The [SAVE] screen opens.

5 Click [Save] and then click the [Save] button.

• After saving the settings, close the [SAVE] screen.

Warning!

When you Click a Point

Be sure to click in the vicinity of the center line of the waveform. Clicking anywhere other than near the center line makes it jump to the clicked position and start playing.

Player Functions

[A/4]: Play or Pause

[3]: Stop

[Volume Adjuster]: Adjusts the Volume

Stop Position of the [3]

Button

Moves to the beginning of the track or to the loop in point.

Blue Part of the Waveform Display

Indicates the range to be played.

Selecting a Track Hot Cue Number that has not been Set Up

After clicking the track hot cue number at the bottom left of the entire waveform display if you create a cue or loop, the selected number is assigned to that cue/loop.

Selecting a Track Hot Cue Number that has been Set Up

If you click the track hot cue number of a cue or loop that has already been set up, the replay point moves to the cue or loop in point.

Using the Beat Guide & Snapping Functions

If you specify the beat interval and display the guide on the top of the waveform, you can set the positions of cues or loops.

‘5-4 Other Useful Functions (Create)’ P.74

Track Hot Cue Tag

‘5-2 Adjusting the Loop Range’ P.72

Saving a Loop you Created as a Track

‘5-3 Saving the Length of a Loop as a Track’ P.73

Index Contents DJS Ver. 1.600 71