Pioneer SVJ-DL01D, SVJ-DS01D manual HEADPHONES Screen

2 Mixing Songs Using the Auto Function to Mix Songs

[HEADPHONES] Screen

Switching between Stereo & Mono Split:

Click either the [STEREO] or [MONO SPLIT] button and select the ‘monitoring by headphones’ method.

Mixing Adjustment:

If you turn the dial to the left to [CUE], the volume of sources selected with headphone cue, other than master, increases, whereas if you turn it to the right to [MASTER], the volume of the Master output increases.

If you right click on the dial, it returns to the middle position between [CUE] and [MASTER].

Using the [CUE] button

If you click the [CUE] button, it will work as follows, depending on the circumstances when you clicked it.

When Paused:

That position is registered for the [CUE] button and it changes to Cue Standby.

When in Cue Standby:

As long as you push and hold the button, it continues to play from the cue position. Once you release the button, it returns to the cue position and goes to cue standby.

During Playback:

It returns to the cue position and stands by.

*Registered cue position information is retained until either a new cue position is set, or the [DJ Play] screen is closed.

With [STEREO] Selected

If you click [STEREO], the source selected with [Headphone Cue] can be monitored in stereo.

With [MONO SPLIT] Selected

If you click [MONO SPLIT], the output to the headphones becomes monaural and you can monitor the audio of the source selected with [Headphone Cue] (not master) on the left and the master audio on the right.

When Cues have been Set

The Loop In button blinks 3 times and then stays lit. (A cue point and a loop in point are the same)

A Cue is overwritten when…

(a)When a new cue is set

(b)When Auto Cue is ON and you put on another song

(c)When Auto Cue is on and you return to the beginning of a song with track search

(d)When a new loop is set up

(e)When a One Track Loop is set up

(f)When you move to any function other than DJ Play

(g)When a track is put on that has an Auto Setup Cue set to it or when it jumps to the beginning of the song via track searching of a track that has an Auto Setup Cue set

Saving Set Cues

The Track Hot Cue function allows you to register up to 4 cues per song.

‘4-1 Setting up to 4 Points to Start Playing (Track Hot Cue)’ P.57

28 DJS Ver. 1.600 Index Contents