Pioneer SVJ-DL01D When the Beat is not Synchronized…, MIX Button, Direction the Cross Fader Moves

2 Mixing Songs Using the Auto Function to Mix Songs

Step	1	2	3	4	5	6	7
	8	9	10	11	12	13	14

13 Click on the [A/4] button of Player B to initiate playback for player B.

•This enables you to monitor the sound from player B on your headphones.

14 Click the [MIX] button to move the slider of the [Cross Fader] to player B.

•As the [Cross Fader] moves, the volume from player A gets quieter while that of player B gets louder.

•When the [Cross Fader] reaches the right side and stops, the volume from player A goes completely off.

When the Beat is not Synchronized…

If the beat is not synchronized, the drums make an out of sync “bam-bam” sound and it all sounds fast and garbled. The timing of the mixing of the songs is either too slow or too fast. Conduct one of the following, ‘Adjusting with the [Jog Dial] before Mixing’ P.26 or ‘Adjusting discrepancies in the [Beat Indicator]’ P.27.

(Contd. on the next page)

[MIX] Button

This button automatically moves the cross fader position from the song being played to the next song to be played.

Setting the Timing (beats) of the [Cross Fader]

‘3-5-3 Setting the Mixing Time (Beat)’ P.53

Direction the [Cross Fader] Moves

The [Cross Fader] moves to the opposite side. If you press the [MIX] button again while it is moving, the [Cross Fader] will stop moving.

If the BPM Isn’t Detected

Songs are mixed at 120 BPM.

Index Contents DJS Ver. 1.600 25