Pioneer SVJ-DL01D Using the TAP button to Re-detectthe BPM, Using the Channel Fader to Mix Songs

2 Mixing Songs

When the BPM (speed) is not Synchronized…

When it is difficult to synchronize the beats with the auto- detected BPM, use the [TAP] button to find the BPM.

Using the [TAP] button to Re-detect the BPM

1.Put the song you want to find the BPM of on a player and play it.

2.While listening to the song, click the [TAP] button to synchronize the beat.

3.The BPM is found by using the interval between clicks as a basis and then displayed.

It takes practice to get good at mixing songs smoothly. At first, mix songs by using the [AUTO MIX] button and auto functions, so you can gradually learn while enjoying DJing.

Using the Channel Fader to Mix Songs

Leaving the [Cross Fader] in its central position, adjust the volume of each player’s [Channel Fader] and change the song that outputs sound.

[Auto Fader]

[Channel Fader]

Mixing Songs Manually

Repositioning the [Cross Fader] to the Middle of the Range

If you right click on the [Cross Fader], it will be instantaneously repositioned in the middle of the range.

Having the [Channel Fader] move automatically

Click the [Auto Fader] button on the right side of the [Channel Fader].

Adjusting the [Auto Fader] button.

Sets the amount of time (beats) it takes the [Channel Fader] to move when the [Auto Fader] button is pressed.

1.Right click the [Auto Fader] button.

2.Click the time (beats) to set it.

Index Contents DJS Ver. 1.600 33