Husqvarna 232L manual Safety Instructions, Vibration damping system, Muffler, Cutting, equipment

SAFETY INSTRUCTIONS

4.Vibration damping system

Your machine is equipped with a vibration damping system, which is designed to give as vibration-free and comfortable use as possible.

Use of incorrectly wound cord or incorrect cutting equipment increases the level of vibration.

The machine‘s vibration damping system reduces the transfer of vibrations between the engine unit/ cutting equipment and the machine‘s handles. The engine body including the cutting equipment is suspended on the handlebar system via a vibration damping ele- ment.

225L Lite

5. Muffler

The muffler is designed to give the lowest possible noise level and to direct the engine‘s exhaust fumes away from the operator. Muffler fitted with catalytic converter is also designed to reduce harmful exhaust components.

In countries that have a warm and dry climate the risk of fire is obvious. We have therefore fitted certain mufflers with a spark arrest screen. Make sure that your muffler is fitted with this kind of screen.

It is extremely important that the instructions for checking, maintaining and servicing the muffler are followed. (see the section “Control, maintenance and service of the machine‘s safety equipment“).

WARNING!

! Mufflers fitted with catalytic converters

!WARNING!

Over exposure to vibrations can result in blood-vessel or nerve injury to persons suffering with blood circulation problems. Seek medical attention if you experience physical symptoms that can be related to over exposure to vibrations. Examples of such symptoms are “numbness“, lack of feeling, “tickling“, “pricking“, “pain“ lack of or a reduction in normal strength, changes in the colour of the skin or its surfaces. These symptoms normally appear in the fingers, hands or wrists.

	become extremely hot during use and
	after stopping. This also applies at idling
	speeds. Contact can result in burns to
	the skin. Be observant to the risk of fire!
!	WARNING!
	Bear in mind that exhaust fumes:
	• contain carbon monoxide, which can
	cause carbon monoxide poisoning.
	Therefore never start or run the machine
	indoors.
	• are hot and can contain sparks that can
	cause fires. Never start the machine
	indoors or close to inflammable material.
6. Cutting

equipment

The trimmer head is intended for trimming grass.

7. Locking nut

The locking nut secures the cutting equipment on the output shaft.

English – 5