SAFETY INSTRUCTIONS

6. Cutting equipment

The section describes how through correct maintenance and through using the right type of cutting equipment you can:

Obtain maximum clearing capacity.

Increase the service life of the cutting equipment.

Two basic rules:

1)Only use the cutting and guard equipment we recommend! See chapter “Technical data“.

2)Check the cutting equipment with regard to damage and crack formation. Damaged cutting equipment should always be replaced.

7. Locking nut

• Protect your hand from injury when assembling, use the blade guard as protection when tightening with a socket spanner. Tighten the nut by turning against the direction of rotation. Loosen the nut by turning in the direction of rotation. (NOTE! the nut has a left-hand thread).

• Tighten the nut using a socket spanner, 35 - 50 Nm (3.5 - 5 kpm).

NOTE!

The locking nut‘s nylon lock must not be so worn that it can be turned by hand. The lock shall hold at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

!WARNING!

Never use a machine with defective safety equipment. The safety equipment should be maintained as described in this section. If your machine does not meet any of these controls you should contact your service workshop.

Cutting equipment

IMPORTANT INFORMATION

The section describes how through correct maintenance and through using the right type of cutting equipment you can obtain maximum clearing capacity and increase the service life of the cutting equipment.

Only use the cutting and guard equipment we recommend! See chapter “Technical data“.

Refer to the instructions for the cutting equipment for the correct winding of cord and for the selection of the right cord diameter.

Trimmer head

• Only use a trimmer head and trimmer cord that is recommended. These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the cutting equipment we recommend! See chapter “Technical data“.

Generally smaller machines require a small trimmer head and vice versa. This is because when clearing using a cord the engine must throw out the cord radially from the trimmer head and also meet resistance from the grass being cleared.

The length of the cord is also important. A longer cord requires greater engine power than a shorter cord of the same diameter.

Make sure the knife positioned on the trimmer guard is intact. This is used to cut the cord to the correct length.

To increase the life of the cord it can be soaked in water for a few days. This will make the line tougher and it will keep longer.

IMPORTANT INFORMATION

Always ensure the trimmer cord is wound tightly and evenly around the drum, otherwise harmful vibrations will occur.

!WARNING!

Always stop the engine before starting work on any part of the cutting equipment. This continues to rotate even after the throttle has been released. Ensure that the cutting equipment has stopped completely and remove the cable from the spark plug before you start to work on it.

English – 7

Page 7
Image 7
Husqvarna 225L/LD, 225L Lite, 232L manual Cutting equipment, Trimmer head

232L, 225L/LD, 225L Lite specifications

The Husqvarna 225L Lite, 225L/LD, and 232L are part of the coveted lineup of trimmers and brushcutters designed for professionals and serious homeowners alike. Known for their lightweight yet powerful design, these machines offer exceptional performance for maintaining gardens, parks, and lawns.

One of the standout features of these models is their lightweight construction. The 225L Lite, in particular, is engineered for reduced weight without compromising power, making it easy to maneuver during extended use. By minimizing fatigue, operators can work longer and more efficiently, tackling tougher tasks without the usual strain associated with heavier tools.

The Husqvarna 225L and 225L/LD come equipped with Smart Start technology, which simplifies the starting process. This system reduces resistance in the starter cord by nearly 40%, making it easier to start the engine with minimal effort. Coupled with a fuel pump that supplies the carburetor with fuel, these trimmers are ready to go quickly and smoothly, maximizing productivity.

Another key attribute of these machines is their Efficient Air Filter system. This feature ensures a longer lifespan for the engine by keeping the air intake clean. The centrifugal air cleaning system separates larger debris from the air before it enters the air filter, thereby extending the intervals between filter cleanings.

The 232L model is notable for its versatility, designed to accommodate various attachments that expand its functionality. This makes it ideal for various landscaping tasks, allowing operators to switch from trimming to edging effortlessly.

All three models are equipped with ergonomically designed handles and harnesses that enhance user comfort during operation. The adjustable handle enables users to find the optimal position for maximum control, ensuring precision while working.

Robust yet user-friendly, the Husqvarna 225L Lite, 225L/LD, and 232L deliver reliability and performance that can handle tough jobs. With features that prioritize ease of use, maintenance, and performance, these trimmers and brushcutters reflect Husqvarna's commitment to quality and innovation in outdoor power equipment, making them a solid choice for anyone looking to achieve a well-groomed landscape.