Chapter 2 Installing Cisco MNM
Performing a New Installation of Cisco MNM
Cisco MNM finds the new elements using the appropriate SSH protocol.
Identifying SSH-Enabled Elements
You can find out if an element uses SSH by checking the Security Policy in the Accounts dialog box.
Task 10: Install the CiscoView Security Module
If you are using CiscoView, you must install the CiscoView Security Module on the CiscoView server after CiscoView and Cisco MNM have been installed.
Step 1 Find the IP address that Cisco MNM is using for the CiscoView server.
For example, if Cisco EMF is installed in <CEMF_ROOT>, enter
%<CEMF_ROOT>/bin/cmnmupdateCVip
Note An IP address of 0.0.0.0 is the local workstation.
If the address is not correct, see the “Changing the IP Address of the CiscoView Server If Needed” section on page
Step 2 Locate the CSCOcvsec.pkg that is shipped with the Cisco MNM software that resides in the following ciscoviewsecurity directory:
#cd ciscoviewsecurity
If the CiscoView server is not installed on the Cisco EMF server, go to Step 3. If the CiscoView server is installed on the Cisco EMF server, go to Step 5.
Step 3 Use ftp to copy the CSCOcvsec package to the CiscoView server using the CiscoView server IP address you determined with the cmnmupdateCVip command:
%ftp cvserverIPAddress ftp> cd /tmp
ftp> binary
ftp> put CSCOcvsec.pkg /tmp/CSCOcvsec.pkg
Step 4 Use Telnet (or SSH) to connect to the CiscoView server using the following command:
#telnet cvserver
Step 5 Change the user to root.
%su - root
Step 6 Install the package using the following command:
#/usr/sbin/pkgadd -d /tmp/CSCOcvsec.pkg
Note If you uninstall and reinstall Cisco MNM, you must reinstall the security package.
|
| Cisco Media Gateway Controller Node Manager Installation Guide |
|
| ||
|
|
| ||||
|
|
|
| |||
|
|
|
| |||
