Cisco Systems Media Gateway Controller Node Manager manual Uninstalling Cisco MNM, 2-23

Chapter 2 Installing Cisco MNM

Uninstalling Cisco MNM

Text similar to the following is displayed:

**WARNING** We don't check diskspace for upgrade right now.

It is the user's responsibility to make sure there is enough free

diskspace.

Continue with CSCOcmnm install [y,n,?]

Step 17 Enter y to continue the installation.

Step 18 Verify the installation according to the instructions in the “Verifying the Cisco MNM Installation” section on page 2-15.

Step 19 Start Cisco MNM and do the rediscover of the following objects:

•All BAMS objects, using the Map Viewer BAMS-View

•All HSI objects, using the Map Viewer HSI-View

•All MGC objects, using the Map Viewer MGC-Node-View

Step 20 Remove the dial plan components if they exists manually for each MGC node:

a.Expand the MGC node

b.Right click the dial plan component

c.Choose Deployment > Delete Objects

d.Click Finish in the prompt.

Note During the upgrade process, you might see error messages caused by Cisco EMF trying to create controllers that already exist. These messages can be safely ignored.

Backing Up Your Databases

If you are upgrading from Cisco MNM 2.x, the upgrade process retains your databases. However, it is good practice to back up your databases before upgrading. For more information, see the Cisco Element Management Framework Installation and Administration Guide at

http://www.cisco.com/en/US/docs/net_mgmt/element_manager_system/3.2_service_pack_7/installatio n/guide/3_2p7adm.pdf

Uninstalling Cisco MNM

Cisco EMF must be running in order for you to uninstall Cisco MNM. Use the following procedure to uninstall the Cisco MNM software:

Step 1 If Cisco MNM is running, quit it. Do not stop Cisco EMF.

Step 2 Insert the Cisco MNM 2.8(1) CD in the CD-ROM drive:

Step 3 Change the working folder using the following command:

# cd /cdrom/cscocmnm

	Cisco Media Gateway Controller Node Manager Installation Guide
OL-18332-01		2-23