Chapter 2 Installing Cisco MNM

Performing a New Installation of Cisco MNM

Note To use an existing FlexLM daemon running on your system, enter n and press Enter.

Step 12 Press Enter if you have a valid license file available on your network. If you do not have a valid license file, enter n.

Note To obtain a license, see “Task 6: Obtain a Cisco EMF License” section on page 2-6.

Note If you do not have a valid license file, you can still continue with the installation. The installation process continues, but you cannot start the Cisco EMF Server until a valid license key is provided and the <CEMF_ROOT>/bin/cemf license command is run to update the license information.

Step 13 Enter the full name, including the path, of the license file and press Enter.

The installation process begins and takes several minutes. When the installation is complete, a message indicates that the Cisco EMF Server Package installation completed satisfactorily.

This completes the Cisco EMF installation procedure on the management server.

If you are using a distributed configuration (with the management server and the presentation server), continue installing Cisco EMF on the presentation server by following the steps in the “Installing on the Management Server” section on page 2-9. Otherwise, continue the installation by performing the procedure described in the “Installing Cisco EMF Service Packs” section on page 2-11.

Installing on the Presentation Server

 

 

 

Note

Cisco EMF must be installed on the Management server first, and the Cisco EMF server must be started

 

 

 

 

before a Presentation client is installed.

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 1

Log in as the root user on the Presentation Server where the Cisco EMF client is to be installed.

 

 

 

Step 2

Insert the Cisco EMF 3.2 Service Pack 7, CD #1 in the CD-ROM drive.

 

 

 

Step 3

Change the folder using the following command:

 

 

 

 

# cd /cdrom/cdrom0

 

 

 

Step 4

Invoke the Cisco EMF installation script using the following command:

 

 

 

 

# ./cemfinstall

 

 

 

 

A menu listing the Cisco EMF installation options displays.

 

 

 

Step 5

Select the Cisco Element Manager Framework - Client option, and press Enter.

 

 

 

Step 6

Accept the default location for installation, /opt/cemf and press Enter.

 

 

 

Step 7

Specify the hostname of the management system where the Cisco EMF Server is installed, and then press

 

 

 

 

Enter.

 

 

 

Step 8

Press Enter to confirm the hostname for the management server.

 

 

 

Cisco Media Gateway Controller Node Manager Installation Guide

 

 

 

 

 

 

 

 

 

 

2-10

 

 

OL-18332-01

 

 

 

 

 

Page 22
Image 22
Cisco Systems Media Gateway Controller Node Manager manual Installing on the Presentation Server, Enter