
Chapter 2 Installing Cisco MNM
Performing a New Installation of Cisco MNM
Note Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid contract but do not have a user ID or password, you can register at this URL: http://tools.cisco.com/RPF/register/register.do.
Step 1 Go to
Note There are no CEMF patches planned currently.
Step 2 Log in to Cisco.com. The Network Management Software page appears.
Step 3 Click Cisco Element Management Framework. The Software Download page appears. Step 4 Select the version of the CEMF Patch that you want to download to your system.
Step 5 Log in and follow the
Starting Cisco EMF
To initiate background processes in Cisco EMF, use these steps:
Step 1 Log in to the system where you installed Cisco EMF
Step 2 Become the root user using the following command:
#su - root
Step 3 Change the working directory to <CEMF_ROOT>/bin using the following command:
#cd <CEMF_ROOT>/bin
Where <CEMF_ROOT> is the directory where Cisco EMF is installed.
Step 4 Use the following command to start Cisco EMF if the Cisco EMF background processes are not already running
#./cemf start
Note Depending on your server, it might take
Task 9: Install Cisco MNM Release 2.8(1) and Verify the Installation
Follow the instructions in this section to install Cisco MNM. If you are upgrading from Version 1.5 or 2.x, see the “Upgrading from Previous Cisco MNM Releases” section on page
Check for the latest software patches by going to the URL provided in the “Installation Software” section on page
|
| Cisco Media Gateway Controller Node Manager Installation Guide |
|
| ||
|
|
| ||||
|
|
|
| |||
|
|
|
|