Kodak 4400, 5600, 4600 Replacing the Thermal Fuse Assembly, Installing the Thermal Fuse Assembly

SERVICE MANUAL

Replacing the THERMAL FUSE ASSEMBLY

Warning

Dangerous Voltage

[1]Disconnect the main power.

[2]Do the replacement procedure for the LOWER HOUSING ASSEMBLY.

[3]Cut and remove the necessary WIRE TIES.

[4]Remove the black wire from the THERMAL FUSE ASSEMBLY on the POWER SWITCH.

[5]Remove the gray wire from the THERMAL FUSE ASSEMBLY from the POWER CORD.

[6]Loosen the Torx SCREW on the PREHEAT DUCT approximately half way.

[7]Pull the THERMAL FUSE ASSEMBLY out of hole of the LOWER LIGHT BAFFLE ASSEMBLY.

Installing the THERMAL FUSE ASSEMBLY

[1]Do the replacement procedure for the THERMAL FUSE ASSEMBLY in reverse order.

SCREW

PRE-HEAT DUCT

A100_0015GCA

A100_0015GA

THERMAL FUSE

POWER SWITCH

Replacing the LAMP MODULE RECEPTACLE

Warning

Dangerous Voltage

[1]Disconnect the main power.

[2]Do the replacement procedure for the LOWER HOUSING ASSEMBLY.

[3]Cut and remove the necessary WIRE TIES.

[4]Remove the 2 Torx SCREWS on the left side of the LOWER LIGHT BAFFLE ASSEMBLY.

[5]Loosen the Torx SCREW on the right side of the LOWER LIGHT BAFFLE ASSEMBLY approximately 1/2 way.

10 18NOV97 – SM5440-1